Repair Guide for an Alfa Romeo 159 - Inner Door Handle Replacement

Repair Guide for an Alfa Romeo 159 - Inner Door Handle Replacement

Repair Guide for an Alfa Romeo 159 - Inner Door Handle Replacement

The Alfa Romeo 159, a model produced by the Italian manufacturer Alfa Romeo, is a stylish and reliable sedan. However, as with any vehicle model, it does have a few unique issues. One is the inner door handle, which may sometimes malfunction or require replacement. This article will guide you through the steps to replace the Alfa Romeo 159's inner door handle.

Tools Needed

Steps to Replace the Inner Door Handle

Step 1: Prepare Your Tools

Before you start, gather all of the necessary tools listed. Ensure you have a new handle for the inner door of your Alfa Romeo 159.

Step 2: Remove Door Panel

Use the door panel removal tool to pry the door panel away from the door. Start at the bottom corner and work your way around the panel, prying it off the door little by little.

Step 3: Disconnect Inner Door Handle

Once the door panel is removed, locate the inner door handle. Use your screwdriver to disconnect the screws holding it in place. Then gently disconnect any wires that are attached.

Step 4: Install New Door Handle

Take your new door handle and connect any wires that were disconnected from the previous handle. Secure the handle in place using your screwdriver and the screws that came with your replacement handle.

Step 5: Reattach Door Panel

Now that the new handle is installed, reattach the door panel. Start at the top and ensure the clips align before pressing it into place. Make sure not to force it, or you risk damaging the clips or the panel itself.